Heating and Cooling Water Treatment

DESCRIPTION

• CHLORINE SANI 12 is a strong concentrated sanitizer for algae and bacteria control.
• CHLORINE SANI 12 is a sodium hypochlorite based product, which is used in open recirculating systems such as cooling towers and air washers.

ADVANTAGES

• CHLORINE SANI 12 has sanitizing properties that will effectively eliminate all microbiological activity.
• It is an environmentally friendly, ready to use product.

For processes requiring DIN approval, use EZ GUARD™ CHLORINE 12.

DESCRIPTION

• EZ GUARD™ 7330 is a nonionic, broad-spectrum, water-soluble microbicide for use in industrial and commercial recirculating cooling systems, air washers and pasteurizer systems.
• This isothiazolin-based biocide maintains control of microorganisms at concentrations of as low as 1 ppm (active) resulting in cost effective application and reduced dosing cost.

ADVANTAGES

• EZ GUARD™ 7330 is persistent in the water systems, effective at low concentrations, compatible with other inhibitors and effective over a broad pH range.
• EZ GUARD™ 7330 is effective over a broad pH range and remains persistent in the water system providing microbiological control over an extended period.
• When diluted below use concentrations, EZ GUARD™ 7330 is readily biodegradable and is easily deactivated when necessary.

Contact your Chemfil service rep today for a formal quote.

DESCRIPTION

• EZ GUARD™ 8137 is a concentrated liquid blend of neutralizing amines formulated to prevent low pH corrosion (grooving) in condensate recovery systems.
• This product contains amines of different distribution ratios selected to offer protection to all areas in large steam/condensate recovery systems.

ADVANTAGES

• EZ GUARD™ 8137 can be fed neat as received or diluted with soft water to any convenient strength.
• EZ GUARD™ 8137 is compatible with most boiler treatment chemicals and can normally be added in a common mix tank.

Contact your Chemfil service rep today for a formal quote.

DESCRIPTION

• EZ GUARD™ 8325 is a concentrated blended liquid corrosion inhibitor and deposition preventative formulated for use in open recirculating evaporative cooling systems.

ADVANTAGES

• EZ GUARD™ 8325 offers corrosion protection to all system metallurgies and controls solids deposition on heat exchange surfaces, to ensure efficient operation.
• EZ GUARD™ 8325 is all organic, biodegradable and environmentally friendly.
• EZ GUARD™ 8325 is CFIA approved for use in establishments operating under the authority of the agency.

Contact your Chemfil service rep today for a formal quote.

DESCRIPTION

• EZ GUARD™ 8570 Total Clean represents a new generation of scale removers and industrial strength cleaners.
• The major ingredient is an acidic organic salt which provides hard water scale removal capabilities exceeding those of most mineral acids.
• EZ GUARD™ 8570 Total Clean is an excellent replacement product as it is much safer to use than hydrochloric acid, safer, easier and more economical than sulfamic acid and does not generate the fumes and other hazards associated with traditional acid cleaning.
• EZ GUARD™ 8570 Total Clean is relatively innocuous to humans and is classified as a mild skin irritant.

ADVANTAGES

• EZ GUARD™ 8570 Total Clean contains inhibitors and dispersants to facilitate deposit removal with minimal effect on system metallurgies.
• EZ GUARD™ 8570 Total Clean is formulated for use in cleaning cooling towers, evaporative condensers, boilers, heat exchangers and other vessels/systems where hard water scales present problems.

Contact your Chemfil service rep today for a formal quote.

DESCRIPTION

• EZ GUARD™ 8588 is a neutral pH cleaning degreaser, formulated to remove oil, grease, and particulates in new or retrofit installations prior to operation.
• EZ GUARD™ 8588 is designed for use in chilled and hot water loop installations where rapid circulation will ensure good contact and provide scouring action.
• Heating up EZ GUARD™ 8588 in solution while circulating will enhance degreasing performance if needed.

ADVANTAGES

• EZ GUARD™ 8588 is biodegradable, environmentally friendly and is safe for all metallurgies at use concentrations.
• EZ GUARD™ 8588 is a neutral solution so it can be disposed of to waste as is.

Contact your Chemfil service rep today for a formal quote.

DESCRIPTION

• EZ GUARD™ 8686 is a multi functional, highly concentrated liquid corrosion inhibitor that involves a blend of several inhibiting compounds in one.
• When properly used, it will provide excellent iron and copper protection as desired.
• EZ GUARD™ 8686 can be used for various closed hot and chilled water systems.

ADVANTAGES

• EZ GUARD™ 8686 is environmentally friendly and protects both ferrous and non-ferrous system components.
• It is suitable for water and/or glycol solutions.

Contact your Chemfil service rep today for a formal quote.

DIN: 02460696

FOR HEALTH CARE FACILITIES, FOOD PROCESSING AND BEVERAGE PLANT USE

APPLICATION:

FOOD PROCESSING AND BEVERAGE PLANTS: For use as a disinfectant on hard surfaces (countertops, processing surfaces, walls and floors), make a solution using 20 ml of EZ Guard™ Chlorine 12 with 10 litres of water. This solution will have >200 ppm of available chlorine. The disinfectant must be in contact with the surface for 10 minutes. All surfaces that come into contact with food are to be rinsed with potable water after disinfection. AVOID CONTAMINATION OF FOOD.

HEALTH CARE FACILITIES AND FIRST AID ROOMS: For use as a disinfectant on hard surfaces (walls, floors, countertops), make a solution using 20 ml of EZ Guard™ Chlorine 12 with 10 litres of water. This solution will have >200 ppm of available chlorine. The disinfectant must be in contact with the surface for 10 minutes. All surfaces are to be rinsed or wiped off after disinfection.

LAUNDRY: Not for use as a laundry disinfectant. For use on hospital linens dilute 40 – 50 ml of EZGuard™ Chlorine 12 in 1 litre of water. This solution will have >4000 ppm of available chlorine. Add the dilution to wash water before adding laundry.

DESCRIPTION

Through our technical expertise, we will provide onsite testing, analysis and recommendations to improve the heating and cooling system, ensuring that efficiency for all equipment is maximized, while keeping costs minimized.

WATER TREATMENT SERVICE PROGRAM

Our technical service contract for the water treatment program includes testing the process water for the onsite heating and cooling or glycol systems. The duties will include:

• Monthly site visit by one of Chemfil’s Field Service Engineers
• Monthly sampling and testing performed by our field engineers and/or in our ISO certified lab

• • Conductivity, pH, inhibitor, alkalinity, total hardness, dissolved metals, bacteria/mould
  • Calibrating and configuring cooling tower controller for improved performance
• Monthly report emails with recommendations and corrective actions based on testing results
• On call technical support 24/7 at no-charge
• Managing and maintaining inventory for chemical treatment
• Presenting continuous improvement suggestions
• Quarterly corrosion coupon testing (optional/extra charge)

We can set up our monthly service contract depending on the type and number of systems involved. Corrosion coupon testing which takes 3-5 months in the system will be an addition to the monthly service duties and is optional for all customers.

Contact your Chemfil service rep today to set up this service plan!

EZ TREAT™ SODIUM METABISULPHITE 33% or sodium pyrosulfite is an inorganic compound of chemical formula Na2S2O5. For use as a chlorine scavenger ahead of RO systems. Use one cup per 10 litres of day tank solution. Feed solution ahead of RO system into water to be pretreated to protect RO from Cl ions.

Contact your Chemfil service rep today for a formal quote.